A-4 Power Transmission Belts
Main Industry Segments
Various Industries
Applications
Power Transmission Belt
Special Features
Robustness, Abrasion Resistant, Forgiving in case of short term shock like overloads, Versatile
|
|
Product Construction / Design
Pulley Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Pulley Side Surface |
Longitudinal Groove Structure |
Pulley Side Color |
Black |
Traction Layer (Material) |
Polyamide (PA) |
Number of Fabrics |
2 |
Opposite Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Opposite Side Surface |
Impregnated Fabric |
Opposite Side Color |
Green |
Product Characteristics
Drive Determination |
One-Sided Power Transmission |
Antistatically Equipped |
Yes |
Adhesive Free Joining Method |
No |
Food Suitablilty, FDA Conformance |
No |
Food Suitablilty, EU Conformance |
No |
Technical Data
Thickness of Belt |
5.0 mm |
0.20 Inch |
Mass of Belt (belt weight) |
5.3 kg/m |
1.086 lb/sqft |
Tensile Force for 1% Elongation (k1% after running in) per Unit of Width (Habasit Standard SOP3-013) |
21 N/mm |
120 lbf/in |
Nominal Peripheral Force Per Unit of Width |
63 N/mm |
360 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 C |
-4 F |
Max. Operating Temperature Admissible (continuous) |
100 C |
212 F |
Seamless Manufacturing Width |
1140 mm |
44.88 Inch |
All data are approximate values under standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Thermofix (75) |
Pulley Diameter (minimum) |
mm/inch |
300/11.81 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
300/11.81 |
Chemical Resistance
Link to 'Chemical Resistance Information: https://rims.habasit.com
REACH
This product contains more than 0.1% o0f the following substance(s) of very high concern (SVHC) and is (are) included in the Candidate List. Further information is available from your MIB representation. Substance(s): 6,6' -di-tert-butyl-2,2'-methylendi-p-cresol
Mode of Use or Conveyance
Power Transmission
Calculations
With power transmission belts a calculation at least of the belt width and initial elongation is highly recommended. For this serves the Habasit calculation program. The easiest way is to have belt drives calculated by Habasit representatives.
Recommendation
Observe the indications of the machine handbook from the machine manufacturers.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.