A-3LT Power Transmission Belts
Main Industry Segments
Various Industries
Applications
Driving Belt, Power Tansmission Belts
Special Features
Robustness, Wear Resistant, Versatile
|
|
Product Construction / Design
Pulley Side Material |
Chrome Leather |
Pulley Side Surface |
Leather Structure |
Pulley Side Color |
Light Gray |
Traction Layer (Material) |
Polyamide (PA) |
Number of Fabrics |
1 |
Opposite Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Opposite Side Surface |
Impregnated Fabric |
Opposite Side Color |
Green |
Product Characteristics
Drive Determination |
One-Sided Power Transmission |
Antistatically Equipped |
No |
Adhesive Free Joining Method |
No |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, EU Conformance |
No |
Technical Data
Thickness of Belt |
3.1 mm |
0.12 Inch |
Mass of Belt (belt weight) |
3.0 kg/m |
0.614 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
8.0 N/mm |
46 lbf/in |
Nominal Peripheral Force Per Unit of Width |
22 N/mm |
126 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 C |
-4 F |
Max. Operating Temperature Admissible (continuous) |
80 C |
176 F |
Seamless Manufacturing Width |
450 mm |
17.72 Inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Therofix 60 |
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum) |
mm/inch |
125/4.92 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
125/4.92 |
Chemical Resistance
Link to 'Chemical Resistance Information
Mode of Use or Conveyance
Power Transmission
Calculations
With power transmission belts a calculation at least of the belt width and initial elongation is highly recommended. For this serves the Habasit SeleCalc calculation program. The easiest way is to have belt drives calculated by Habasit representatives.
Recommendation
Observe the indications of the machine handbook from the machine manufacturers.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according to ATEX Standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according to ATEX Standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.