A-1 Habasit Machine Tapes

Main Industry Segments

Paper Manufacturing and Processing, Paper Printing and Finishing

Applications

Machine Tape, Paper Handling Belt, Power Transmission Belt, Processing Belt

Special Features 

Abrasion Resistance, Constant Coefficient of Friction, Forgiving in case of short term shock like overloads, Versatile

Product Construction / Design

Conveying Side Material 
Acrylonitrile-Butadiene-Rubber (NBR)
Conveying Side Surface 
Matt
Conveying Side Property
Adhesive
Conveying Side Color
Green
Traction Layer (material)
Polyamide (PA)
Number of Fabrics ​ 
2
Pulley Side Material
Polyurethane Cross-Linked (PUR)
Pulley Side Surface
Smooth
Pulley Side Property
Non-Adhesive
Pulley Side Color
Black

Product Characteristics 

Antistatically Equipped
Yes
Adhesive Free Joining Method
No
Food Suitablilty, EU Conformance
No
Food Suitablilty, FDA Conformance
​No

Technical Data 

Thickness of Belt 
1.20 mm
0.05 Inch
Mass of Belt (belt weight)
1.3 kg/m
0.266 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)
7.0 N/mm
40 lbf/in
Tensile Force for 1% elongation after Relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
4.0 N/mm
23 lbf/in
Min. Operating Temperature Admissible (continuous)
-20 C
-4 F
Max. Operating Temperature Admissible (continuous)
100 C
212 F
Seamless Manufacturing Width
1140 mm
44.88 Inch
All data are approximate values under standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Thermofix 75
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum)
mm/inch
40/1.57
Pulley Diameter Minimum with Counter Flection
mm/inch
40/1.57
Slider Bed Suitable 
Value
Yes
Carrying Rollers Suitable 
Yes
Troughed Installation Suitable
No

Chemical Resistance

Link to 'Chemical Resistance Information'

Mode of Use or Conveyance 

Declined, Horizontal, Inclined, Power Transmission, Vertical

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask MIB

Recommendation

Do not go below initial elongation (epsilon) ~ 0.5%, Observe the indications of the machine handbook from the
machine manufacturers
​
Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from
sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"