3DD2SL Conveyor Belt
Main Industry Segments
Baked snacks, Biscuit and Crackers, Bread, Pastry
Applications
Biscuit/Cookie pre-oven applications, Dough rework belt
Special Features
Easy release, Flexibility in all directions, Knife-edge (nosebar) suitable, Oil and fat resistant
|
|
Product Construction / Design
Conveying Side Material |
Polyester (PET)/Cotton (CO) fabric |
Conveying Side Surface |
Fabric |
Conveying Side Property |
Non-adhesive |
Conveying Side Color |
Beige |
Traction Layer (Material) |
Polyester (PET)/Cotton (CO) fabric |
Number of Fabrics |
2 |
Pulley Side Material |
Polyester (PET)/Cotton (CO) fabric |
Pulley Side Surface |
Fabric |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
Beige |
Product Characteristics
Antistatically equipped |
No |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
Yes - Check Document of Compliance (DoC) in Habasit Portal |
Food Suitability, USDA Conformance |
No use intended |
Technical Data
Thickness of Belt |
1.00 mm |
0.04 Inch |
Mass of Belt (belt weight) |
0.90 kg/m² |
0.184 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
9.0 N/mm |
5 lbf/in |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
0.65 N/mm |
4 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 C |
-4 F |
Max. Operating Temperature Admissible (continuous) |
100 C |
212 F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.20 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.20 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.20 |
- |
Seamless manufacturing width |
2000 mm |
78.74 in |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Anker A36
|
Knife-edge (nosebar) radius (minimum) |
mm/inch |
- |
- |
4/0.157 |
4/0.157 |
Pulley diameter (minimum) |
mm/inch |
25/0.98 |
15/0.59 |
15/0.59 |
15/0.59 |
Pulley diameter minimum with counter flection |
mm/inch |
25/0.98 |
20/0.79 |
20/0.79 |
20/0.79 |
Admissible tensile force per unit of width |
N/mm lbf/in |
5.0 29 |
5.0 29 |
5.0 29 |
5.0 29 |
Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
5.0 29 |
5.0 29 |
5.0 29 |
5.0 29 |
Slider bed suitable |
- |
Yes |
Yes |
Yes |
Yes |
Carrying rollers suitable |
- |
Yes |
Yes |
Yes |
Yes |
Troughed installation suitable |
- |
No |
No |
No |
No |
Powerturns / curved installations |
- |
No |
No |
No |
No |
Knife-edge (nosebar) suitable |
- |
No |
No |
- |
- |
Metal detector suitable |
- |
Yes |
Yes |
Yes |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Horizontal
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3% Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.