2P120/GP White Conveyor Belt
Main Industry Segments
Biscuit and Crackers, Bread
Applications
Packaging belt
Special Features
High grip surface, Low noise applications suitable
|
|
Product Construction / Design
Conveying Side Material |
Polyvinylchloride (PVC) |
Conveying Side Surface |
Jink wave (sine wave) structure |
Conveying Side Property |
Adhesive |
Conveying Side Color |
White |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
2 |
Pulley Side Material |
Polyester (PET) |
Pulley Side Surface |
Impregnated fabric |
Pulley Side Color |
White |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
Yes - Check Document of Compliance (DoC) in Habasit Portal |
Food Suitability, USDA Conformance |
No use intended |
Other Conformance/Approval |
Yes - Check Document of Compliance (DoC) in Habasit Portal |
Technical Data
Thickness of Belt |
5.1 mm |
0.20 Inch |
Mass of Belt (belt weight) |
3.8 kg/m² |
0.778 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
8.0 N/mm |
46 lbf/in |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
7.0 N/mm |
40 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-10 C |
14 F |
Max. Operating Temperature Admissible (continuous) |
70 C |
158 F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.20 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.15 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.15 |
- |
Seamless manufacturing width |
1500 mm |
59.06 in |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Flexproof 20 x 80 |
Pulley diameter (minimum) |
mm/inch |
60/2.36 |
Pulley diameter minimum with counter flection |
mm/inch |
80/3.15 |
Admissible tensile force per unit of width |
N/mm lbf/in |
8.5 49 |
Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
5.0 29 |
Slider bed suitable |
- |
Yes |
Carrying rollers suitable |
- |
Yes |
Troughed installation suitable |
- |
No |
Powerturns / curved installations |
- |
No |
Knife-edge (nosebar) suitable |
- |
No |
Low noise applications |
- |
Yes |
Metal detector suitable |
- |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Declined, Horizontal, Inclined
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3% Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.