Product Data Sheet
TMIPH533EMB

View this Data Sheet as PDF 
Product Designation
Product Group: Nonwoven conveyor and processing belts
Product Sub-Group: Trackmate for package handling
Main Industry Segments: Airport; Baggage handling; Distribution centers; Materials Handling; Parcel distribution/Overnight carrier
Belt Applications: Acceleration belt; Baggage handling - public view; Check-in belt; Induction belt; Metering/singulation belt
Special Features: Embossed; Excellent tracking characteristics; Low noise running/pulley side; No delamination; Non fraying; Powerturn suitable
Mode of Use/Conveyance: Horizontal; Inclined; Metering
Product Design (enlarged)


Product Construction/Design
Conveying Side (Material): Polyvinylchloride (PVC)
Conveying Side (Surface): Embossed cover
Conveying Side (Property): Adhesive
Conveying Side (Color): Black
Traction Layer (Material): Polyester scrim (PET)
Number of Fabrics: 1
Running Side/Pulley Side (Material): Polyester web/fleece (PET) saturated with PVC
Running Side/Pulley Side (Surface): Friction surface (impregnated)
Running Side/Pulley Side (Color): Black
Product Characteristics
Slider bed suitable: Yes
Carrying rollers suitable: Yes
Troughed installation suitable: Conditionally
Power turns, curved installations: Yes
Nosebar suitable: No
Permanently antistatic: No
Metal detector suitable: No
Flammability: Flame-retardant according to DIN 22103 and ISO 340; Flame retardant to ASTM D-378
Food suitability, FDA conformance: No
Food suitability, USDA recommendations: Not conformable
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity, per ASTM standards, and are based on the Master Joining Method.
Technical Data
Thickness: 3.8 mm 0.150 in.
Mass of belt (belt weight): 4.7 kg/m2 0.96 lbs./sq.ft
Nosebar Radius (minimum): - mm in.
Pulley diameter (minimum): 50.8 mm 2.0 in.
Pulley diameter minimum with counter flection: 63.5 mm 2.5 in.
Tensile force for 1.5% elongation (k1.5% static) per unit of width (Habasit standard QAD-WI-10-35): 24 N/mm 135 lbs./in.
Admissible tensile force per unit of width: 35 N/mm 200 lbs./in.
Operating temperature admissible (continuous): Min -23
Max 82
°C
°C
Min -10
Max 180
°F
°F
Coefficient of friction of driving pulley of steel: NA [-] NA [-]
Coefficient of friction of driving pulley with friction cover: 0.45 [-] 0.45 [-]
Coefficient of friction on slider bed of pickled steel sheet: NA [-] [-]
Coefficient of friction on slider bed of stainless steel sheet: 0.2 [-] 0.20 [-]
Seamless manufacturing width: 1828.8 mm 72 in.
On request other seamless manufacturing width: 1524 mm 60 in.
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity, per ASTM standards, and are based on the Master Joining Method.
Chemical Resistance
Chemical Resistance Class: 3 (for details, see separate overview)
Remark: These indications are not guarantees of properties.
Resistant to: Acid salts; Alkaline salts; All solids; Diluted acids and alkalis; Dirt; Dryness; Glycols; Humidity; Neutral salts; Putrefaction
Limited resistance to: None
Not resistant to: Caustic Soda > 10%; Chlorinated hydrocarbons; Hydrochloric acid > 20%; Liquid fuels; Most solvents; Oils; Strong acids; Sulphuric acid > 50%
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Installation and Handling Instructions
Do not go below initial tension (epsilon) ~ 0.3%; Install the slack belt and tension until running perfectly under the full belt load.
Storage
For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Joining System
Master Joining Method: Clipper #2HT


Alternative Joining Method: Flexproof
Link to Joining Data Sheet
Limitations
No dangers and limitations 
Legend
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity, per ASTM standards, and are based on the Master Joining Method.
* No calculation Value
1) No further authoritative acceptance since elimination of prior approval procedure of September 24‚ 1997‚ from USDA authority
2) Product containing different coating materials such as elastomer‚ natural fibers‚ silicones‚ etc.‚ are not subject to the directive 2002/72/EC
3) CLA: Coordination of the centre line-average value Ra (in the US also Arithmetical Average (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal.
BgVV Bundesinstitut für gesundheitlichen Verbraucherschutz und Veterinärmedizin (German Federal Institute for Consumers' Health Protection and Veterinary Medicine)
EEC European Economic Community
EU European Union (Directive 2002/72/EC)
FDA Food and Drug Administration
NA Not available
NAP Not applicable
USDA United States Department of Agriculture (Food Safety and Inspection Service‚ Washington D.C.)
Quality System (certified)
Independant certification bodies, worldwide, attest that Habasit AG Switzerland, its affiliated manufacturing companies and the sales organization possess efficient organizational, technical and human resources to maintain, guarantee and provide consistently high quality products and services, to the requirements of the ISO 9001/2000 Quality management systems standard.

Certified Manufacturing Sites:
Habasit AG, Switzerland: Registered by SQS, CH 3052 Zollikofen, Switzerland, since 1987.
Habasit UK: Registered by SGS Yarsley, Camberley, Surrey, UK, since 1992
Habasit Italiana, Vigliano: Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2002.
Plastomeccanica: Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2001.
Habasit USA Buffalo: Registered by Det Norske Veritas, Houston Texas, USA, since 2001.
Habasit ABT: Registered by NQA, Acton MA, USA, since 2000. 
Product Liability, Applications Considerations
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer.
All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES. 

Last modification on 11/22/2005